Template · Published Nov 18, 2026
Free Medical Practice Calculators: 6 Numbers Every Owner Should Run
For owner-physicians and office managers who want a dollar figure, not a feeling: six calculators that run in the page, each with its formula, its inputs and a sourced benchmark.
Medical practice calculators turn operating problems into dollars and days: what no-shows cost, what a role really costs, turnover, payroll share, days of cash and break-even visits. At MGMA's 6.81% no-show rate (MGMA, 2025), two physicians at 20 visits a day lose about 539 visits a year. Run all six below.
- All six calculators, pre-filled with a worked two-physician example
- A Scorecard that sets each result against its benchmark and adds up the dollars at stake
- A "what to do first" line that names your biggest leak
- A 9-case Playbook and every source with its year
Save it, rerun it every quarter on the same reports, and compare.
Get the free calculators workbookKey takeaways
- MGMA's single-specialty no-show rate was 6.81% in 2023, up from 5% in 2021 and 2022 (MGMA Stat, Jan 2025); 42% of groups now charge a no-show fee.
- Health care employers spent $14.80 an hour on benefits and payroll taxes for every $35.13 of wages in June 2026 (BLS, 2026): a role costs about 1.42 times its wage.
- Replacing one medical assistant cost $14,200, about 40% of salary, at one academic clinic (JABFM, 2020; 2017 data).
- Support staff salaries and benefits typically run about a quarter of practice revenue (MGMA Stat, June 2025).
- The median small health care services business held 30 days of cash (JPMorgan Chase Institute, 2016; 2015 data, older than 2021).
The six calculators at a glance
A benchmark tells you what an average practice looks like. A calculator tells you what your gap costs, in dollars, this year, which is what gets a decision. Each calculator below runs in the page with your numbers; the formulas are here so you can check the math.
| Calculator | Formula | Benchmark (source, year) | Where your inputs live |
|---|---|---|---|
| No-show cost | Scheduled visits x no-show rate x share not refilled x deposits per visit | 6.81% no-show rate (MGMA, 2023 data) | Schedule reports, bank deposits |
| Full cost of a role | Wage x hours x weeks x (1 + benefits and payroll taxes) | About 42% on top of wages (BLS, June 2026) | Payroll register |
| Turnover cost | Departures x annual wage x 40% | $14,200 per medical assistant (JABFM, 2017 data) | Payroll and HR records |
| Payroll share | Support staff wages x (1 + load) / deposits | About a quarter of revenue (MGMA, 2025) | Payroll register, bank deposits |
| Days of cash | Cash / (monthly outflows / 30) | 30 days, small health care median (JPMorgan Chase Institute, 2015 data) | Bank statements |
| Break-even visits | Fixed costs a month / (deposits per visit - variable cost) / clinic days | A cushion of 10% or more (ClinicOps rule of thumb) | Books, schedule |
1. No-show cost
No-shows are usually the biggest dollar leak a calculator finds, because every missed slot is a visit the practice staffed and never billed for. The refill rate is the fastest lever: a slot refilled from a same-day waitlist is not a loss, and raising that share needs no change in patient behavior.
No-show cost calculator
Every field holds the worked example. Replace each with your own number; nothing you type leaves this page.
For a by-provider and by-visit-type breakdown, use the full no-show cost calculator. In the same MGMA poll, 42% of medical groups said they charge a no-show fee (n=622).
2. Full cost of a staff role
A role costs about 1.42 times its wage once benefits and payroll taxes are counted. In health care and social assistance, wages were 70.4% of employers' compensation costs and benefits 29.6% in June 2026 (BLS ECEC, 2026). The default wage is the May 2025 national median for medical assistants, $21.97 an hour (BLS, 2025).
Full cost of a staff role
Wage plus benefits and payroll taxes. The default load is the BLS figure for health care employers, June 2026.
Use the full cost whenever you compare a hire with a system, a part-time role or outside help; the wage alone makes the hire look 30% cheaper than it is. The staffing ratio guide checks whether the headcount fits the volume.
3. Turnover cost
Every departure costs about 40% of that role's annual wage in recruiting, onboarding and lost time. That is the only peer-reviewed figure for a practice role: $14,200 to replace one medical assistant at the University of North Carolina Family Medicine Center (JABFM, 2020; 2017 data, one clinic), so treat it as a floor. Turnover is still moving: 29% of medical groups reported higher staff turnover in 2026 than in 2025 (MGMA Stat, May 2026, n=303).
Turnover cost
Departures times about 40% of annual wages, the replacement cost measured for medical assistants (JABFM, 2020).
For the role-by-role version, use the employee turnover cost calculator.
The free workbook holds the six calculators, a Scorecard against each benchmark and a line that names your biggest leak.
Get the free workbook4. Payroll share of deposits
MGMA says support staff salaries and benefits typically account for roughly a quarter of total practice revenue (MGMA Stat, June 2025). Measure yours against deposits, the money that reached the bank, and watch the trend month to month more than the benchmark.
Payroll share of deposits
Support staff only: leave physicians and other providers out.
A rising share with flat deposits is the signal: look at overtime, temporary cover and work a system could take off people's desks before you cut a role.
5. Days of cash on hand
Days of cash on hand is how long the practice could pay its bills if deposits stopped. The JPMorgan Chase Institute measured it across about 600,000 small businesses: the median held 27 days, small health care services businesses 30, and a quarter of all small businesses fewer than 13 (JPMorgan Chase Institute, 2016; 2015 data).
Days of cash on hand
Cash in the bank divided by average daily outflows.
To see which weeks are short before they arrive, run the 13-week cash flow forecast.
6. Break-even visits a day
Break-even is the number of visits a day that covers fixed costs before the month makes a dollar. Fixed costs are the ones that do not change with volume: staff, rent, software, services. Variable costs rise with each visit: supplies and card fees.
Break-even visits a day
Fixed costs divided by what each visit contributes after its variable cost.
A thin cushion is why no-shows matter so much: two missed visits a day come straight out of it. The fixed-cost lines come from the operations budget.
The worked example: one practice, six numbers
| Calculator | Result | Benchmark | Reading |
|---|---|---|---|
| No-show cost | $107,712 a year | 6.81% rate | The biggest dollar leak |
| Full cost of an MA | $64,891 ($31.20 an hour) | 1.42 x wage | Use it to compare options |
| Turnover | $50,400 next year | 40% of wage | Second-biggest leak |
| Payroll share | 25.4% | About 25% | Near the benchmark |
| Days of cash | 24 days | 30 days | $30,000 short of 30 days |
| Break-even | 27.9 visits a day | 10% cushion | 33% cushion at 37 a day |
Two numbers decide what happens next: no-shows at about $107,700 a year and turnover at $50,400 are $158,000 of known leaks, against $30,000 of cash to rebuild. Fund the no-show fix first. If you would rather have someone read the numbers with you and rank the first three fixes in dollars, that is the Profit Leak Diagnostic on what a practice operations consultant costs.
Keeping the numbers honest
Use the same period for every input in a calculation, usually the last 90 days or the last 12 months, so one slow month does not distort one side of the formula. Write the period and the source report beside each result. When you rerun next quarter, the change you see is real, not a different report pulled a different way.
Every calculator here uses totals and averages only. Nothing you type is sent or stored, and no patient information is needed. Defaults are either a cited benchmark or a labelled example; replace all of them with your own numbers, and put the two that moved most on the owner dashboard with one named owner each.
- Pull last quarter's schedule, payroll register and bank statements.
- Run the no-show and turnover calculators and add the two results together.
- Run days of cash and break-even, and write both on the owner dashboard.
- Pick the biggest leak and name one owner and one date for its fix.
Frequently asked questions
What calculators should a medical practice owner use?
Start with the six that turn everyday problems into dollars or days: no-show cost, the full cost of a staff role, turnover cost, support staff payroll as a share of deposits, days of cash on hand, and break-even visits a day. Each one compares a number you already have with a published benchmark.
How do you calculate the cost of no-shows?
Multiply scheduled visits by the no-show rate, by the share of those slots you do not refill the same day, and by average deposits per visit. MGMA's single-specialty no-show rate was 6.81% in 2023, but use your own rate from the schedule.
How much does an employee really cost a medical practice?
About 1.42 times the wage. Health care employers spent $14.80 an hour on benefits and payroll taxes for every $35.13 of wages in June 2026 (BLS). A medical assistant at the $21.97 median hourly wage costs about $31.20 an hour at full cost.
How many days of cash should a medical practice keep?
There is no official standard. The median small health care services business held 30 cash buffer days in the JPMorgan Chase Institute's study of about 600,000 firms (2015 data). Set your own target with your accountant and build it with a monthly reserve line.
How do you calculate break-even visits for a medical practice?
Divide fixed monthly costs by deposits per visit minus the variable cost of each visit, then divide by clinic days in the month. Compare the result with the visits you actually complete: the gap is your cushion.
Do these calculators store my numbers?
No. They run in your browser, use totals and averages only, and send nothing anywhere. No patient information is entered or needed.
Next steps
- The Independent Medical Practice Hub
Every owner system, from the numbers to succession.
- The full no-show cost calculator
By provider and by visit type.
- The employee turnover cost calculator
Role by role, with vacancy time.
- The operations budget guide
Where the priced leaks sit next to their fixes.
- What a practice operations consultant costs
Every ClinicOps engagement and fee, published.
Put a dollar figure on your biggest leak
Take the free workbook and run all six on last quarter's reports. If the Scorecard surprises you, book the free 20-minute Chaos Audit and we will walk through the numbers with you.